Voltex Front Under Spoiler - EVO X.

Part# VL-E10-F2

***This is just the Front Lip Only***

Fits: 08+ EVO X

Part# VL-E10B

Voltex Carbon Fiber Wing Gurney Flap- EVO X

Part# VL-E10W

Voltex Carbon Fiber Hood Air Scoop - EVO X

Part# VL-E10TE

VIS Carbon Fiber Vortex Generators are made from the finest carbon fiber available.

Picture shows with optional Carbon Fiber OEM Style Center Rear Diffuser.

VIS Carbon Fiber Side Skirts are made from the finest carbon fiber available.

Picture shows with optional Carbon Fiber Rally Style Rear Aprons.

VIS Carbon Fiber Bumpers are made from the finest carbon fiber available.

VIS Carbon Fiber Hoods are made from the finest carbon fiber available.

VIS Carbon Fiber Bumpers are made from the finest carbon fiber available.

VIS Carbon Fiber Grill Inserts are made from the finest carbon fiber available.

VIS Carbon Fiber Bumper Scoops are made from the finest carbon fiber available.

All VIS Fiberglass Spoilers are made out of a high quality fiberglass. Professional installation is required.

Lancer Evo X +15mm wide front fenders with a specifically designed wheel drag reducing vent.

Also features a +20mm blister vent at top of fender for additional air extraction.

Offered in both FRP and Carbon.

Sale Price: $884.95

Prevent soot and heat damage from occurring to your rear diffuser!

This carbon fiber heat shield set will help preserve your rear diffuser and looks fantastic!

Installation is very simple and completed within a couple minutes. Tyrant uses an aerospace quality 3K dry carbon...

TiTek carbon fiber cooling plates are designed to direct air towards the top of the radiators to aid in maintaining lower water temperatures.

They are made with very high quality and are surfaced with a nice shiny clear coat to reduce fading from heat.

Sale Price: $334.95

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

TiTek Carbon Fiber Hood Vents (Pair) - EVO X 08+

Fits: 2008+ Lancer EVO X

Part# CFH-71201

This is a modified version of the factory one with a taller air guide and is made of high grade carbon fiber.

This duct aids in allowing more air into the engine bay and also allowing for more heat to escape as your car cools down as its sitting.

This does not obstruct t...

Spyder Projector Xenon HID- LED Halo Headlights - EVO X

These headlights are designed to improve looks and visibility for your vehicle. They are made by OEM approved and ISO certified manufacturers. They are made with OEM standard quality and are designed for stock lights direct rep...

Spyder Projector Xenon HID - LED Halo Black Headlights - EVO X

These headlights are designed to improve looks and visibility for your vehicle. They are made by OEM approved and ISO certified manufacturers. They are made with OEM standard quality and are designed for stock lights dire...

Spyder Projector LED Halogen Model Smoke - EVO X

These headlights are designed to improve looks and visibility for your vehicle. They are made by OEM approved and ISO certified manufacturers. They are made with OEM standard quality and are designed for stock lights direct replacement...

Spyder Projector Halogen LED Model - EVO X

These headlights are designed to improve looks and visibility for your vehicle. They are made by OEM approved and ISO certified manufacturers. They are made with OEM standard quality and are designed for stock lights direct replacement.

Spyder LED Tail Lights Smoke - EVO X

OEM Specific Quality made For Direct Plug-And-Play Fitment. Designed For Use With Aftermarket Or Stock Bulbs

PART# 5030399

Looking to replace your OEM headlights that are fogged up, damaged, or just plain boring? If so, then a pair of our custom crystal headlights are perfect for you. We make our headlights more durable than OEM headlights while still producing the same amount of light if not more. These head...

Glossy Black housing smoked lens LED projector headlights. New Audi R8 style SMD LED strips for the european look. Comes equipped with H1 high and H1 low beam bulbs. Made by OEM approved and ISO certified manufacturers in materials that meed or exceed strict OEM requirements. Professional instal...

Chrome housing clear lens LED projector headlights. New Audi R8 style SMD LED strips for the european look. Comes equipped with H1 high and H1 low beam bulbs. Made by OEM approved and ISO certified manufacturers in materials that meed or exceed strict OEM requirements. Professional installation ...

Seibon Carbon components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship with over 15 years of experience working with carbon fiber.

Every component is constructed with a consistent weave pattern. Our production processe...

Carbon fiber front grille for 2008-2010 Mitsubishi Lancer EVO X

Part# FG0809MITEVOX

Seibon OEM-Style Carbon Fiber Trunk Lid adds style and give the car a more sporty look. The carbon fiber trunk is a full carbon fiber top clear coated and then a fiberglass under lay. Fits with all factory mechanisms and hardware.

Carbon fiber rear door panels 2008-2010 for Mitsubishi EVO X.

Seibon OEM Style Carbon Fiber Side Skirts add style and give the car a lower look.

Seibon OEM-Style Carbon Rear Spoiler attaches to your trunk to add style and give the car more downforce and better stability at higher rates of speed.

With Seibon you will enjoy the tight and constant weave of their carbon fiber products. You will appreciate the workmanship that goes into their manufacturing process, and you certainly will like the way their products actually FIT your EVO X.

Seibon Carbon Fiber Rear Diffusers are designed to add downforce and look great on your vehicle. Protect your underbody and increase performance with Seibon Carbon Fiber Rear Diffusers.

With Seibon you will enjoy the tight and constant weave of their carbon fiber products. You will appreciate the workmanship that goes into their manufacturing process, and you certainly will like the way their products actually FIT your EVO X.

Today there are a lot of carbon fiber manufacturers to choose from for styling your EVO X. These manufacturers offer you a wide range of similar looking products for varying prices.

Carbon fiber front door panels for 2008-2010 for Mitsubishi EVO X.

Carbon fiber fog light surround for 2008-2010 Mitsubishi Lancer EVO X.

With Seibon you will enjoy the tight and constant weave of their carbon fiber products. You will appreciate the workmanship that goes into their manufacturing process, and you certainly will like the way their products actually FIT your EVO X.

This takes the place of the annoying piece of rubber which tends to fall off from the factory Aero lip.

Uses factory mounting holes and snaps in addition to two small screws to secure to the car.

Note:This will ONLY fit Evo X's that have the factory Aero kit upgrade.

Sale Price: $200.00

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

Want to add more bling to your Evo X? These carbon side spats are made from the highest quality carbon fiver weave. Spats come with 3M ahesives and mounting hardware for easy 10 minute install. Made to fit Evo X with Non Aero kit only. Available in 1x1 weave only. Sold in pairs.

Made from high quality carbon fiber with clear coat finish. Enhance your evo's look with a pair of these side skirt extensions and stand out from the crowd. Each kit comes with 3M adhesives and utilizes the factory mounting screw locations under the car. No drilling or modifications needed to ...

Made from high grade 2x2 twill weave carbon fiber. These CF pieces cover your existing factory splitter towards the bottom. Nice exterior upgrade for your Evo X! Sold in pairs. Fits non aero kits only.

Made from high quality 2x2 carbon fiber weave. Canards are wrapped in carbon fiber on both top and bottom portions. Kit includes 4 canard pieces and comes with mounting hardware.

Evo X carbon fender vents offer an aerodynamic styling accent to your Evo while acting as a functional air duct. Each CF vent is made from high grade carbon fiber. Sold in pairs and comes with 3M adhesives. To install fender vents you need to remove front wheel and plastic panels inside the whe...

Evo X trunk spoiler is made from high quality carbon fiber with clear coat finish. Kit includes 3M adhesives for easy installation. Made to fit with or without the factory wing. Great mod for those who want to go wingless anytime!

Spoiler utilizes factory mounting holes for install. Spoiler will not cover all the factory holes on the trunk. Kit comes supplied with bolts for easy install!

Fits: Evo X

Made from high quality real carbon fiber with clear coat finish. 
Includes mounting hardware for easy installation.  A nice add on piece
for your rear bumper.  Available in 2x2 weave only.

Check out these new released laser etched polarized mirrors for your Evo X! The polarized mirrors are full replacements they are held on with clips behind which can be popped off easily with your fingers.

Mirrors are sold in pairs. Fits 2008-2015 Evo X and Ralliart models only.

Diffuser is made from high grade twill weave carbon fiber with excellent fitment.  Each kit comes with necessary hardware and instructions for complete install. Diffusers not only adds style to your car but helps reduce air turbulence during high speed runs.  Diffuser includes center di...

Spoiler utilizes factory mounting holes for install. Spoiler will not cover all the factory holes on the trunk. Kit comes supplied with bolts for easy install!

Fits: Evo X

If you are looking to replace your factory wing the Rexpeed Duckbill trunk spoiler is the only answer.

Sleek and aggresive low profile look that will not attract too much attention especially from the po-po.

Trunk spoiler is made from high quality fiberglass using oem fa...

If you are looking to replace your factory wing the Rexpeed Duckbill trunk spoiler is the only answer.

Sleek and aggresive low profile look that will not attract too much attention especially from the po-po.

Trunk spoiler is made from high quality ...

Rexpeed Dry Carbon Door Trim Overlays - EVO X

The front door overlay pieces are made from dry carbon with clear coat finish pnly 0.5mm thick. Sold in pairs and comes with adhesive tape for easy intall. These are a perfect match and compliments our center carbon dash trim pieces tha...

Made from real Dry Carbon Fiber. Retractable antenna helps boost signal strenght in bad coverage area.

Made from high quality 2x2 weave carbon fiber with clear coat finish.   Utilizes factory mounting location for easy install.

The vortex generator not only looks amazing, it is actually functional too! The addition of a vortex generator will improve your EVO X downforce. Cutting through the wind barrier like butter.

The Rexpeed EVO X vortex generator is made from high grade twill weave carbon fi...