Spyder LED Tail Lights Smoke - EVO X

OEM Specific Quality made For Direct Plug-And-Play Fitment. Designed For Use With Aftermarket Or Stock Bulbs

PART# 5030399

Material: Carbon FRP

Kit Consists of:
- Rear Add-On x 2 (L/R)

Fits: 08+ EVO X

Part#MEVO08BMXRSRSC

All Aero Dynamic kits are made out of a high quality plastic-fiber glass or poly-urethane and comes with wire mesh grill if applicable.

This is a modified version of the factory one with a taller air guide and is made of high grade carbon fiber.

This duct aids in allowing more air into the engine bay and also allowing for more heat to escape as your car cools down as its sitting.

This does not obstruct t...

TiTek Carbon Fiber Hood Vents (Pair) - EVO X 08+

Fits: 2008+ Lancer EVO X

Part# CFH-71201

Glossy Black housing smoked lens LED projector headlights. New Audi R8 style SMD LED strips for the european look. Comes equipped with H1 high and H1 low beam bulbs. Made by OEM approved and ISO certified manufacturers in materials that meed or exceed strict OEM requirements. Professional instal...

Add a touch of carbon fiber flair with the Carbign Craft Dry Carbon Grill Bezel. The carbon fiber weave brings an exotic racing look to your car. Each Carbign Craft product is designed for perfect fitment and utilizes fade resistant epoxy coating to reduce the effects of UV light.

Part # 104641

Fits: 2008-2015 Mitsubishi Lancer EVO X, Fits All Models, Base Model, GSR, MR, Evo 10

Material : FRP (Fiberglass Reinforced Plastics)

All GT Concept parts are designed exclusively by Extreme Dimensions’ in-house award winnin...

Material: Carbon FRP

Kit Consists of:
- Front Add-On x 2 (L/R)

Fits: 08+ EVO X

Part# MEVO08BMXRSFAD

Material:  Carbon FRP

Kit Consists of:
- Rear Add-On x 2 (L/R)

Fits: 08+ EVO X

Part# MEVO08BMXRSRDF

Material: Carbon FRP

Kit Consists of:
- Front Add-On x 2 (L/R)

Fits: 08+ EVO X

Part# MEVO08BMXRSFADX

For use with the EVO X C-west front bumper.

***Special Order only - takes 2-3 months***

Material: CFRP

More air into the engine efficiently. This air Intake is designed to inhale more fresh air into the hot engine room around the turbine efficiently with out affecting any driver’s view.

Fits: 08+ EVO X

Part# CW-CCZ01A-BAIC...

The vortex generator not only looks amazing, it is actually functional too! The addition of a vortex generator will improve your EVO X downforce. Cutting through the wind barrier like butter.

The Rexpeed EVO X vortex generator is made from high grade twill weave carbon fi...

Provides ventilation to the inside of the vehicle where open windows are prohibited during competition.
Easily mounts between window and frame on rear windows.
Ventilates while keeping dirt out for full rally competition use.
High grade aluminum material, painted black.
Co...

Easily enhance the entrance way to your Evo X with this set of door trim overlays.

TECH TIP: Super easy installation. Installs in minutes with the supplied adhesive. Price includes a set of (2)

Rexpeed Dry Carbon Door Trim Overlays - EVO X

The front door overlay pieces are made from dry carbon with clear coat finish pnly 0.5mm thick. Sold in pairs and comes with adhesive tape for easy intall. These are a perfect match and compliments our center carbon dash trim pieces tha...

Part Number: MO-BumperRelease-X

All VIS Fiberglass Spoilers are made out of a high quality fiberglass. Professional installation is required.

Mitsubishi OEM EVO X Molding Package

PARTS INCLUDED:

5727A006 QTY 1
5757A017 QTY 1
5757A018 QTY 1

SHIPPING WITHIN USA IS INCLUDED IN THE PRICE!

Made with OEM quality Super Polyurethane.

Hardware is included with all of our products. For products that required double-sided tape, industrial grade double-sided tape comes pre-installed.

Each carbon duct is made from high grade twill weave carbon fiber.  Kt includes mesh grill and mounting hardware for easy installation.

Comes with all necessary hardware for a complete install.  Available in 2x2 weave only.

Sale Price: $229.95

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

VIS Carbon Fiber Grill Inserts are made from the finest carbon fiber available.

The Beatrush rear tow hook is a direct bol-on so no drilling or cutting on bumper is required.  This piece is durable and robust.  Perfect for track EVO Xs.

Comes with brackets and everything needed to install.

Chrome housing clear lens LED projector headlights. New Audi R8 style SMD LED strips for the european look. Comes equipped with H1 high and H1 low beam bulbs. Made by OEM approved and ISO certified manufacturers in materials that meed or exceed strict OEM requirements. Professional installation ...

This is the piece that goes under the rear bumper. Same bumper extension that Mitsubishi put on your EVO stock from the factory.

Genuine Mitsubishi part.

TECH TIP: Only fits cars with production date of 1-11-2007 - 3-07...

Part # 109417

Fits: 2008-2015 Mitsubishi Lancer Evo X, Fits All Models, Base Model, GSR, MR, Evo 10

Material : FRP (Fiberglass Reinforced Plastics)

Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resis...

46 Piece Kit Includes Four (4) Quick Releases and Mounting Kits

Quik Latches are CNC Machined from 6061 – T6 Aluminum with Billet Finish

Brackets are made from 5052 Aluminum Alloy


Part Number:EVOX-QRK

Made from high quality 2x2 carbon fiber weave. Canards are wrapped in carbon fiber on both top and bottom portions. Kit includes 4 canard pieces and comes with mounting hardware.

Mitsubishi Fog Lamp Assembly 8321A663 - EVO X

Looking to replace your OEM headlights that are fogged up, damaged, or just plain boring? If so, then a pair of our custom crystal headlights are perfect for you. We make our headlights more durable than OEM headlights while still producing the same amount of light if not more. These head...

Sleek and aggressive low profile look that will not attract too much attention especially from the po-po.

Give the EVO 10 Mug a mean upgrade instantly!

Made from high grade 2x2 twill weave carbon fiber. 

These CF pieces cover your existing factory splitter towards the bottom.

Nice exterior upgrade for your Evo X! 

Sold in p...

Made from high grade 2x2 twill weave carbon fiber. These CF pieces cover your existing factory splitter towards the bottom. Nice exterior upgrade for your Evo X! Sold in pairs. Fits non aero kits only.

Enhance the look of your Lancer in minutes with this carbon fiber spoiler! 

TECH TIP: Made from Aerospace Carbon Fiber.  Mounts using 3m Double Sided Tape.

Fits: Mitsubishi Lancer Evolution ...

This takes the place of the annoying piece of rubber which tends to fall off from the factory Aero lip.

Uses factory mounting holes and snaps in addition to two small screws to secure to the car.

Note:This will ONLY fit Evo X's that have the factory Aero kit upgrade.

Sale Price: $200.00

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

If you are looking to replace your factory wing the Rexpeed Duckbill trunk spoiler is the only answer.

Sleek and aggresive low profile look that will not attract too much attention especially from the po-po.

Trunk spoiler is made from high quality fiberglass using oem fa...

Constructed of carbon graphite composite with aluminum leading edge, the APR Carbon Fiber Canard help increase front downforce at high speeds stabilizing the chassis during hard cornering.

Found on many GT race cars, canards allow you to customize yo...

If you are looking to replace your factory wing the Rexpeed Duckbill trunk spoiler is the only answer.

Sleek and aggresive low profile look that will not attract too much attention especially from the po-po.

Trunk spoiler is made from high quality ...

Carbon fiber gurney flap helps increase downforce at high speeds. Made from high grade carbon fiber weave. Kit includes 3M adhesives for easy install.

Great mod for track days!

These window vents have carbon fiber wrapped on both sides it not only looks good from the outside but from the inside as well. Great mod for track days!

Sold in pairs: left and right side

Sale Price: $182.95

Prevent soot and heat damage from occurring to your rear diffuser!

This carbon fiber heat shield set will help preserve your rear diffuser and looks fantastic!

Installation is very simple and completed within a couple minutes. Tyrant uses an aerospace quality 3K dry carbon...

***Single Exit Exhaust Only***

Kit includes Tow Hook, Mounting Kit, Spacer, 304 Stainless Steel Hardware

Made from 3/8″ 6061 – T6 Aluminum

Parts are Waterjet Cut to Ensure a Precision Fit

Each Hook is Deburred By Ha...

Made from high quality carbon fiber with clear coat finish. Attaches to the rear corners of your factory bumper for enhance appearance. Utilizes existing oem mounting locations for easy installation. Sold in pairs available in 2x2 weave only.

Spoiler utilizes factory mounting holes for install. Spoiler will not cover all the factory holes on the trunk. Kit comes supplied with bolts for easy install!

Fits: Evo X

Want to add more bling to your Evo X? These carbon side spats are made from the highest quality carbon fiver weave. Spats come with 3M ahesives and mounting hardware for easy 10 minute install. Made to fit Evo X with Non Aero kit only. Available in 1x1 weave only. Sold in pairs.

***Fits Evo X Dual Exit Exhaust Only ***

Made from 6061 – T6 Aluminum

Includes Stainless Steel Hardware and Custom Bolts

Part Number: EVOX-TIII

Evo X trunk spoiler is made from high quality carbon fiber with clear coat finish. Kit includes 3M adhesives for easy installation. Made to fit with or without the factory wing. Great mod for those who want to go wingless anytime!

Evo X carbon fender vents offer an aerodynamic styling accent to your Evo while acting as a functional air duct. Each CF vent is made from high grade carbon fiber. Sold in pairs and comes with 3M adhesives. To install fender vents you need to remove front wheel and plastic panels inside the whe...

Easily enhance the ass of your EVO 10!

Made from high quality carbon fiber with clear coat finish. 

Attaches to the rear corners of your factory bumper for enhance appearance.

Sold in pairs of (2) - includes both sides

Sale Price: $169.95

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

Each carbon fiber side spat comes with high gloss clear coat finish. Gives your Evo a distinctive look and also protects your paint from rock chips. Includes 3M adhesive and are predrilled for a easy install. No modifications needed to install the side spats. Comes in pairs left and right side....

Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4156A029

Part # 108257

Fits: 2008-2015 Mitsubishi Lancer Evo X, Fits All Sedan Models, Base Model, DE, ES, GT, SE, Ralliart, Evolution 10

Material : FRP (Fiberglass Reinforced Plastics)

Trim : 4DR

Hand laid, high quality 6 oz. fiberglass
S...

Mishimoto silicone Evolution X radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit!

...

Evo X trunk spoiler is made from high quality carbon fiber with clear coat finish. Kit includes 3M adhesives for easy installation. Made to fit with or without the factory wing. Great mod for those who want to go wingless anytime!

Beatrush Red Front Tow Hook for Evolution X

**Works with JDM Front Bumper Beam only**

Made from high quality real carbon fiber with clear coat finish. 
Includes mounting hardware for easy installation.  A nice add on piece
for your rear bumper.  Available in 2x2 weave only.

Made from high quality carbon fiber. The side spats are made to fit Mitsubishi OEM aero kits only. Kit includes mounting screws and 3M adhesives for easy 10 minute install. Guarantee perfect fitment!

Great way to make your EVO mug more aggressive looking.

Made from high quality 1x1 weave carbon fiber with clear coat finish.

Kit includes 3M adhesives for easy install. Installation only takes a few minutes a...

Replaces the subtle stock hood scoop vent with this upgraded carbon fiber scoop!