Carbon fiber gurney flap helps increase downforce at high speeds. Made from high grade carbon fiber weave. Kit includes 3M adhesives for easy install.

If you are looking to replace your factory wing the Rexpeed Duckbill trunk spoiler is the only answer.

Sleek and aggresive low profile look that will not attract too much attention especially from the po-po.

Trunk spoiler is made from high quality ...

Constructed of carbon graphite composite with aluminum leading edge, the APR Carbon Fiber Canard help increase front downforce at high speeds stabilizing the chassis during hard cornering.

Found on many GT race cars, canards allow you to customize yo...

If you are looking to replace your factory wing the Rexpeed Duckbill trunk spoiler is the only answer.

Sleek and aggresive low profile look that will not attract too much attention especially from the po-po.

Trunk spoiler is made from high quality fiberglass using oem fa...

This takes the place of the annoying piece of rubber which tends to fall off from the factory Aero lip.

Uses factory mounting holes and snaps in addition to two small screws to secure to the car.

Note:This will ONLY fit Evo X's that have the factory Aero kit upgrade.

Sale Price: $200.00

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

Enhance the look of your Lancer in minutes with this carbon fiber spoiler! 

TECH TIP: Made from Aerospace Carbon Fiber.  Mounts using 3m Double Sided Tape.

Fits: Mitsubishi Lancer Evolution ...

Sleek and aggressive low profile look that will not attract too much attention especially from the po-po.

Give the EVO 10 Mug a mean upgrade instantly!

Made from high grade 2x2 twill weave carbon fiber. 

These CF pieces cover your existing factory splitter towards the bottom.

Nice exterior upgrade for your Evo X! 

Sold in p...

Made from high grade 2x2 twill weave carbon fiber. These CF pieces cover your existing factory splitter towards the bottom. Nice exterior upgrade for your Evo X! Sold in pairs. Fits non aero kits only.

Looking to replace your OEM headlights that are fogged up, damaged, or just plain boring? If so, then a pair of our custom crystal headlights are perfect for you. We make our headlights more durable than OEM headlights while still producing the same amount of light if not more. These head...

Mitsubishi Fog Lamp Assembly 8321A663 - EVO X

Made from high quality 2x2 carbon fiber weave. Canards are wrapped in carbon fiber on both top and bottom portions. Kit includes 4 canard pieces and comes with mounting hardware.

Part # 109417

Fits: 2008-2015 Mitsubishi Lancer Evo X, Fits All Models, Base Model, GSR, MR, Evo 10

Material : FRP (Fiberglass Reinforced Plastics)

Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resis...

46 Piece Kit Includes Four (4) Quick Releases and Mounting Kits

Quik Latches are CNC Machined from 6061 – T6 Aluminum with Billet Finish

Brackets are made from 5052 Aluminum Alloy


Part Number:EVOX-QRK

This is the piece that goes under the rear bumper. Same bumper extension that Mitsubishi put on your EVO stock from the factory.

Genuine Mitsubishi part.

TECH TIP: Only fits cars with production date of 1-11-2007 - 3-07...

The Beatrush rear tow hook is a direct bol-on so no drilling or cutting on bumper is required.  This piece is durable and robust.  Perfect for track EVO Xs.

Comes with brackets and everything needed to install.

Chrome housing clear lens LED projector headlights. New Audi R8 style SMD LED strips for the european look. Comes equipped with H1 high and H1 low beam bulbs. Made by OEM approved and ISO certified manufacturers in materials that meed or exceed strict OEM requirements. Professional installation ...

Made with OEM quality Super Polyurethane.

Hardware is included with all of our products. For products that required double-sided tape, industrial grade double-sided tape comes pre-installed.

Each carbon duct is made from high grade twill weave carbon fiber.  Kt includes mesh grill and mounting hardware for easy installation.

Comes with all necessary hardware for a complete install.  Available in 2x2 weave only.

Sale Price: $229.95

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

VIS Carbon Fiber Grill Inserts are made from the finest carbon fiber available.

Mitsubishi OEM EVO X Molding Package

PARTS INCLUDED:

5727A006 QTY 1
5757A017 QTY 1
5757A018 QTY 1

SHIPPING WITHIN USA IS INCLUDED IN THE PRICE!

All VIS Fiberglass Spoilers are made out of a high quality fiberglass. Professional installation is required.

Part Number: MO-BumperRelease-X

Easily enhance the entrance way to your Evo X with this set of door trim overlays.

TECH TIP: Super easy installation. Installs in minutes with the supplied adhesive. Price includes a set of (2)

Rexpeed Dry Carbon Door Trim Overlays - EVO X

The front door overlay pieces are made from dry carbon with clear coat finish pnly 0.5mm thick. Sold in pairs and comes with adhesive tape for easy intall. These are a perfect match and compliments our center carbon dash trim pieces tha...

Provides ventilation to the inside of the vehicle where open windows are prohibited during competition.
Easily mounts between window and frame on rear windows.
Ventilates while keeping dirt out for full rally competition use.
High grade aluminum material, painted black.
Co...

The vortex generator not only looks amazing, it is actually functional too! The addition of a vortex generator will improve your EVO X downforce. Cutting through the wind barrier like butter.

The Rexpeed EVO X vortex generator is made from high grade twill weave carbon fi...

Material: CFRP

More air into the engine efficiently. This air Intake is designed to inhale more fresh air into the hot engine room around the turbine efficiently with out affecting any driver’s view.

Fits: 08+ EVO X

Part# CW-CCZ01A-BAIC...

For use with the EVO X C-west front bumper.

***Special Order only - takes 2-3 months***

Material: Carbon FRP

Kit Consists of:
- Front Add-On x 2 (L/R)

Fits: 08+ EVO X

Part# MEVO08BMXRSFADX

Material: Carbon FRP

Kit Consists of:
- Front Add-On x 2 (L/R)

Fits: 08+ EVO X

Part# MEVO08BMXRSFAD

Material:  Carbon FRP

Kit Consists of:
- Rear Add-On x 2 (L/R)

Fits: 08+ EVO X

Part# MEVO08BMXRSRDF

Part # 104641

Fits: 2008-2015 Mitsubishi Lancer EVO X, Fits All Models, Base Model, GSR, MR, Evo 10

Material : FRP (Fiberglass Reinforced Plastics)

All GT Concept parts are designed exclusively by Extreme Dimensions’ in-house award winnin...

Add a touch of carbon fiber flair with the Carbign Craft Dry Carbon Grill Bezel. The carbon fiber weave brings an exotic racing look to your car. Each Carbign Craft product is designed for perfect fitment and utilizes fade resistant epoxy coating to reduce the effects of UV light.

Glossy Black housing smoked lens LED projector headlights. New Audi R8 style SMD LED strips for the european look. Comes equipped with H1 high and H1 low beam bulbs. Made by OEM approved and ISO certified manufacturers in materials that meed or exceed strict OEM requirements. Professional instal...

Material: Carbon FRP

Kit Consists of:
- Rear Add-On x 2 (L/R)

Fits: 08+ EVO X

Part#MEVO08BMXRSRSC

All Aero Dynamic kits are made out of a high quality plastic-fiber glass or poly-urethane and comes with wire mesh grill if applicable.

This is a modified version of the factory one with a taller air guide and is made of high grade carbon fiber.

This duct aids in allowing more air into the engine bay and also allowing for more heat to escape as your car cools down as its sitting.

This does not obstruct t...

TiTek Carbon Fiber Hood Vents (Pair) - EVO X 08+

Fits: 2008+ Lancer EVO X

Part# CFH-71201

Spyder LED Tail Lights Smoke - EVO X

OEM Specific Quality made For Direct Plug-And-Play Fitment. Designed For Use With Aftermarket Or Stock Bulbs

PART# 5030399

INGS Front Canards are made from only the highest quality materials and is designed for unparalleled fitment and original styling. The FRP parts are light weight, durable and easlily repaired when needed. This product ships unpainted.

Canards sold as a pair, left and right.

Sale Price: $314.95

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

Spoiler utilizes factory mounting holes for install. Spoiler will not cover all the factory holes on the trunk. Kit comes supplied with bolts for easy install!

Fits: Evo X

Enhance your vehicles appearance with Chargespeed Aero parts and kits. Aftermarket exterior parts help improve your vehicles aerodynamics by increasing downforce. Chargespeed is well known worldwide as a high quality aero and performance manufacturer. All parts come pre-drilled for ease of fitmen...

Enhance your vehicles appearance with Chargespeed Aero parts and kits. Aftermarket exterior parts help improve your vehicles aerodynamics by increasing downforce. Chargespeed is well known worldwide as a high quality aero and performance manufacturer. All parts come pre-drilled for ease of fitmen...

Made with OEM quality Super Polyurethane.

Hardware is included with all of our products. For products that required double-sided tape, industrial grade double-sided tape comes pre-installed.

Enhance your vehicles appearance with Chargespeed Aero parts and kits. Aftermarket exterior parts help improve your vehicles aerodynamics by increasing downforce. Chargespeed is well known worldwide as a high quality aero and performance manufacturer. All parts come pre-drilled for ease of fitmen...

TiTek carbon fiber cooling plates are designed to direct air towards the top of the radiators to aid in maintaining lower water temperatures.

They are made with very high quality and are surfaced with a nice shiny clear coat to reduce fading from heat.

Sale Price: $334.95

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

Designed to combat the effects of front end lift, APR Carbon Fiber Wind Splitters help increase overall down force on your car.

Wind Splitter Support Rods are also included to secure the splitter to a vehicle front bumper. Made of real carbon fiber. Sale Price: $344.25

Enhance your vehicles appearance with Chargespeed Aero parts and kits. Aftermarket exterior parts help improve your vehicles aerodynamics by increasing downforce. Chargespeed is well known worldwide as a high quality aero and performance manufacturer. All parts come pre-drilled for ease of fitmen...

Did you get rear ended or have a pesky hater bash your taillights in with a baseball bat?

These are the same taillights that Mitsubishi put on your EVO from the factory.

Price includes a set of (2) taillights.

Fits: Mitsubishi ...

Made from high quality carbon fiber with clear coat finish. Enhance your evo's look with a pair of these side skirt extensions and stand out from the crowd. Each kit comes with 3M adhesives and utilizes the factory mounting screw locations under the car. No drilling or modifications needed to ...

These Canards Are only to be used with the Ings EVO X N-Spec Front Bumper

Price is for canards only, bumper is sold separate.

Fits: 08+ EVO X

Part# 00152-01103

The INGS N-Spec is revolutionized as a functional beauty fostered directly from racetrack. The INGS N-Spec is born with the direct input of the technology obtained from Super Taikyu race Series. On the street, it powerfully appeals the functional beauty with its refined beautiful design and disti...

Spyder Projector Halogen LED Model - EVO X

These headlights are designed to improve looks and visibility for your vehicle. They are made by OEM approved and ISO certified manufacturers. They are made with OEM standard quality and are designed for stock lights direct replacement.

Material: Carbon FRP

Kit Consists of:
- Side Add-On x 2 (L/R)
*will NOT fit factory sports aero skirts

Fits: 08+ EVO X

Part# MEVO08BMXRSSS

Part # 104639

Fits: 2008-2015 Mitsubishi Lancer EVO X Fits All Models, Base Model, GSR, MR, Evo 10

Material : FRP (Fiberglass Reinforced Plastics)

All GT Concept parts are designed exclusively by Extreme Dimensions’ in-house award winning design team. ...

This air outlet opening is designed bigger than stock to push out more air from the engine and also by changing the angle of the fins, air flow on top of the hood will pull out the air more from the engine bay. Sold as a pair and made from CFRP.

Carbon Fiber Reinforced Plastic(CFRP):...

Carbon fiber front grille for 2008-2010 Mitsubishi Lancer EVO X

Part# FG0809MITEVOX

Enhance your vehicles appearance with Chargespeed Aero parts and kits. Aftermarket exterior parts help improve your vehicles aerodynamics by increasing downforce. Chargespeed is well known worldwide as a high quality aero and performance manufacturer. All parts come pre-drilled for ease of fitmen...

Made with OEM quality Super Polyurethane.

Hardware is included with all of our products. For products that required double-sided tape, industrial grade double-sided tape comes pre-installed.