...Slotted Rotors 6-Piston Calipers (Front) Big Brake Kits give your vehicle that Supercar look and feel, and exceed stock performance in two areas. First, larger rotors increase heat capacity. Second, stiffer calipers and stainless steel lines...
...seibon carbon fiber front lip spoiler adds style and gives the car more downforce and better stability at higher rates of speed. TECH TIP: Direct bolt on! Easy installation uses the stock mounting points and hardware. Fits: Mitsubishi Lancer...
...Samco turbo inlet hose improves turbo spool and throttle response by replacing the restrictive stock inlet pipe. This pipe is made with 4ply high temperature reinforced samco silicone. TECH TIP: Direct replacement for the restrictive...
...kit includes the Lower IC Pipe Assembly, Upper IC Pipe Assembly, Intake Pipe, Air Filter and Synchronic BOV/DV. Features full recirculation. Connects to the stock intercooler. Fits: 08+ EVOX MR Part#...
...the correct brake pad material is essential for good stopping performance. For street driven cars an OEM type pad may work fine, but once a car ventures out onto the track stock pads become obsolete. WORKS has developed a brake pad specifically...
...the correct brake pad material is essential for good stopping performance. For street driven cars an OEM type pad may work fine, but once a car ventures out onto the track stock pads become obsolete. WORKS has developed a brake pad specifically...
...is the piece that goes under the rear bumper. Same bumper extension that Mitsubishi put on your EVO stock from the factory. Genuine Mitsubishi part. TECH TIP: Only fits cars with production date of 1-11-2007 - 3-07-2008 Fits: Mitsubishi...
...are the same pedals that come stock on the Evolution X MR - both have the TC-SST. So if you have an automatic -- these will work. Fits: 08+ Evolution X MR...
...With this kit you can convert your standard AMS EVO X intake to the AMS cold-air version. The AMS EVO X Performance Cold Air Intake offers the best performance gains available. By relocating the air filter to behind the driver side front...
...The AMS EVO X Fuel Pressure Regulator Kit is designed for anyone running an upgraded fuel pump and or fuel injectors. Whether you are running too rich and need to back off the fuel pressure or if you are running too lean on your current...
...The AMS EVO X 5 Speed Gate Selector Bushing Kit is made to eliminate shifter play and give a tighter feel providing precise gear changes. This kit was initially designed to improve shifting in our EVO X Time Attack car and is now available for...
...The AQ Motorsports Evo X LICP (Lower Intercooler Pipe) is designed to replace the rubber factory pipe while offering improved response and power. Made from 2.5" 6061 Aluminum and completely mandrel bent (no welds), our LICP offers great looks...
...solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to get rid of the unwanted slop and flexing of the stock units which allows for the...
...AMS 3" Stainless Steel Resonated Test Pipe provides an excellent alternative to running a catalytic converter on the street or at the track. Like all other AMS exhaust products this resonated test pipe is Tig welded with 100% 304 stainless...
...divorced and transformable 3" stainless O2 housing and downpipe assembly for 2008 and up Mitsubishi Evolution X (10) is a much higher flowing replacement for stock restrictive cast iron exhaust elbow and small diameter downpipe just before the...
...EVO X GT35R turbo kit, externally wastegated. Twinscroll, stock location, includes all oil/coolant lines. Does not include some extra parts shown. These parts are sold separately: External Tial 44mm wastegate, 3" O2 housing/downpipe, 3" inlet...
...flow compressor 3" inlet elbow for the EVO X turbo. Designed to be used on stock turbo (alum adapter plate shown) or without the adapter plate, it fits the Garrett GT3071R, GT3076R, or ATP GT35R. 3 bolt flanged. All aluminum, TIG welde...
...flow compressor 3" inlet pipe set for EVO X turbo. Includes 3" inlet elbow, 3" couplers, and upper pipe to mate to airbox. All aluminum, TIG welded construction and wrinkle black powdercoated. Designed to be used on stock turbo (alum adapter...
...GarrettŪ Evo X Turbo Upgrade allows you to push your AWD, rally-bred monster to a tire-smoking estimated 525 HP. Each turbo has been meticulously designed to be a bolt-on upgrade with no fabrication, cutting or welding required. The GarrettŪ...
...adapter wire for EV1 to EVO X. Allows a square plug Bosch/EV1 style injector to be plugged into the stock EVO X wiring harness. Quantity 1 for 1 injector....
