Agency Power wanted to take the suspension capabilities to the next level by developing this Rear Sway Bar kit for the 2008 and up Mitsubishi EVO X

Agency Power has been known for their incredible suspension components to make you the fastest on the race track.

Agency Power has been known for their incredible suspension components to make you the fastest on the race track. Without even wasting time, Agency Power has released their new fully adjustable lower control arms for the 2008 and up Mitsubishi EVO X. These control arms replace the factory units o...

BEATRUSH Front Strut Bar EVO X

In efforts to further improve the rigidity of the Evolution X, Beatrush developed a rear strut bar. The rear strut bar uses a hollow D-shaped aluminum shaft bent to conform with the body of the car and allows the wiper fluid/battery to remain in place.

Beatrush EVO X Strut Bar Feat...

This five point lower arm bar braces the chassis to the front control arms of your Evo X for reduced body roll and improved steering response.

CUSCO proudly announces the release of "softer" sway bars for the EVO X (CZ4A).

A vehicle that is driven on a road surface other than concrete usually performs better with a softer suspension setup. A stronger sway bar is more ideal for concrete surfaces since it attempts to s...

The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The aluminum bar possesses high rigidity due to the two different designs available. The Type 1 is pressed ribbed while the Type 2 is sectioned. Cusco has al...

Cusco’s sway bars are available for most applications on the front or rear of the vehicle. Reducing body roll during hard cornering is not the only feature that can be increased with these. Depending on the particular size and position of the sway bar, over-steer and under-steer can be modifi...

The Cusco Type II lower arm bar features the same tubular high-tension lightweight aluminum design and anti-corrosion paint as the Type I. The difference though, is that this bar improves body rigidity by connecting the lower arm mounts in multiple positions rather than just two, thus greatly inc...

The Cusco Front Center Power Braces for the 2008-2009 Lancer Evo X is a mulit-point, 2-part, longitudinal brace that is designed to strengthen the front/middle portion of the chassis and provides a noticable improvement in aggressive cornering.

The Cusco Front Floor Power Brace for the 08-09 Evo X connects the left and right sides of the front section of the chasis using a multi-point lateral brace.

The Cusco Front Rear Side Power Braces connect two points on each side of the chassis under the rear doors. These longitudinal braces are the most foward in the chassis of Cusco's rear braces.

Cusco Power Braces stiffen your EVO X and improve handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts.

Fits: Mitsubishi Lancer Evolution X

Part # 566 492 C

Cusco Power Braces stiffen your EVO X and improve handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts.

Fits: Mitsubishi Lancer Evolution X

Part # 566 492 C

The Cusco Power front braces stiffen your EVO X and improve handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts. Remove the oringal cover to use.

Fits: Mitsubishi Lancer Evolution X
...

The Cusco Power front braces stiffen your EVO X and improve handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts. Remove the oringal cover to use.

Fits: Mitsubishi Lancer Evolution X
<...

The Cusco Power floor brace stiffen's your EVO X and improves handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts.

Fits: Mitsubishi Lancer Evolution X

Part # 566 492 FR

The Cusco Power Rear Member brace stiffen's your EVO X and improves handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts. Rear-Side Requires minor insulator modification.

Fits: Mitsubishi La...

The Cusco Rear Member Power Brace for the Evo X is multi-point, 2-part brace kit that is replaces an OEM brace and helps to tie the rear suspension mounting points to the chassis.

This lateral Cusco 08-09 Evo X brace installs above the exhaust and provides multi-point stiffening, but does require trimming of the OEM heatsheild.

These left and right Cusco Evo X braces connect the rear suspension to the rear section of the chassis for improved stiffness.

***This part will NOT fit on the USDM EVO X Chassis***

CUSCO proudly announces the release of "softer" sway bars for the EVO X (CZ4A).

A vehicle that is driven on a road surface other than concrete usually performs better with a softer suspension setup. A stronger sway bar is more ideal for concrete surfaces since it attempts to s...

The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The aluminum bar possesses high rigidity due to the two different designs available. The Type 1 is pressed ribbed while the Type 2 is sectioned. Cusco has al...

Cusco’s sway bars are available for most applications on the front or rear of the vehicle. Reducing body roll during hard cornering is not the only feature that can be increased with these. Depending on the particular size and position of the sway bar, over-steer and under-steer can be modifi...

CUSCO presents the ZERO-3G line of suspension coilovers. These competition use suspension system is developed from data and experience taken from our involvement in various professional world class motorsports.

The Gravel spec series are designed most ideal for the use in:

Sale Price: $2737.95

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

Instantly improve steering feel and handling with the installation of a front strut tower bar.

Instantly improve your EVO's handling capabilities!

The H&R Lowering Springs are a great choice for enthusiasts who are looking to lower the center of gravity in order to make their car handle better.

Enhance the cornering performance of your EVO X with a set of Hotchkis Sport Suspension sport sway bars.

Enhance the cornering performance of your EVO X with a Hotchkis Sport Suspension sport front sway bar.

The Hotchkis sport sway bar package increases front roll stiffness giving the car crisp, quick turn-in response and balanced handling.

Hotchkis Sport Suspension sway ba...

Owners of Evo X’s demand maximum performance from their cars. Seeing the
need for stronger end links during hours of track testing, Hotchkis
Sport Suspension has designed a high quality, adjustable rear end link
specifically designed for the EVO X.

Enhance the cornering performance of your EVO X with a Hotchkis Sport Suspension sport rear sway bar.

The Hotchkis sport sway bar package increases rear roll stiffness giving the car crisp, quick turn-in response and balanced handling.

As delivered the EVO X has slight u...

These rear upper Camber-Arms are adjustable to fine tune your EVO X's handling in the rear.

When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only.

- Constructed of Steel Alloy for Lightweight yet Durabl...

These rear upper Camber-Arms are adjustable to fine tune your EVO X's handling in the rear.

When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only.

- Con...

This sporty accessory stiffens your vehicles front chassis to help achieve better handling and control when cornering.

Sale Price: $562.95

Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 3817A134

This brace tightens your vehicle's chassis, while providing a cool visual with the trunk space.

Fits: Lancer EVO X 2010-2011

Part# MZ574598EX

Corner with confidence!

This brace stiffens your EVO X's rear chassis, while providing a slick visual within the trunk.

Fits: Mitsubishi Lancer Evolution X

DME Adjustable Suspension Arms can be dialed in for the proper amount of Toe, caster, and camber depending on vehicle usage. Our suspension arms offer endless amount of adjustability and is a must for all track and drifting vehicles. Professional allignment is highly recommended.

Ben...

DME Adjustable Suspension Arms can be dialed in for the proper amount of Toe, caster, and camber depending on vehicle usage. Our suspension arms offer endless amount of adjust-ability and is a must for all track and drifting vehicles. Professional alignment is highly recommended.

Ben...

Increase your car's handling performance by getting rid of the soft rubber stock bushings. These Powerflex urethane replacements will improve performance, prolong tire life, and bring older cars back to life!

Fits: Lancer Evolution X

Part#: PFF44-403-27x2

Adjustable bushings offer +/- 0.75 degrees of on-car camber adjustment.

Fits: Lancer EVO X

Part# PFF44-401x2

Fits: Lancer EVO X

Part# PFF44-402GBx2

Increase your car's handling performance by getting rid of the soft rubber stock bushings. These Powerflex urethane replacements will improve performance, prolong tire life, and bring older cars back to life!

Fits: Lancer Evolution X

Part#: PFF44-403-25x2

Increase your car's handling performance by getting rid of the soft rubber stock bushings. These Powerflex urethane replacements will improve performance, prolong tire life, and bring older cars back to life!

Fits: Mitsubishi Lancer Evolution X

Part #PFF44-403-23x2

Progress anti-roll bars dramatically improve handling. How? They minimize the traction-robbing body "lean" that rolls part of the outside tires off the pavement.

Spring Rate: 14k/12k

Super Sport+ coilover has all the features of the Super Sport+ but adds the benefit of a helper spring. The helper spring allows the shock piston to be placed in the optimal position within the shock body, increasing rebound stroke, and maximizing articulation on...

The tanabe 4 point front lower arm bar will help stiffen up the front end of your EVO X and noticeably improve cornering.

Activate more grip by upgrading your suspension with WHITELINE's anti-sway bar kit for the 2008+ Mitsubishi Evolution X!

This kit features 3-point adjustable front and rear bars for quick on- track adjustments tuned for perfectly balanced neutral steering and can be adjust...

As the name suggests their objective is to reduce sway, or body roll, and stabilize a vehicle under lateral (cornering) forces. Formula 1 cars still use sway bars along side the shocks and springs as it is the ONLY suspension component principally designed to control body roll. Unfortunat...

The Whiteline trailing arm bushing kit is designed to tighten up the front control arms by taking slop out of the stock control arm bushings.

Fits: Mitsubishi Lancer Evolution X

Sale Price: $83.95

The Whiteline KCA395 is designed to raise the front roll-center of geometry of your EVO X, by using specially engineered ball-joints and tie rod ends while still maintaining original steering geometry.

Sale Price: $292.88

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

The stock evolution rubber endlink bushings can wear and crack over time.

Whiteline endlinks feature anodized aluminum turn-buckles and fully adjustable stainless steel rod-ends, allowing you to custom tune your suspension setup to maximize handling performance.
...

The EVO X Whiteline Lateral Link-Adjust Camber kit kit allows greater
range, more precise adjustment, a more direct connection between body
and rear suspension delivering more predictable handling behavior.

As the name suggests their objective is to reduce sway, or body roll, and stabilize a vehicle under lateral (cornering) forces. Formula 1 cars still use sway bars along side the shocks and springs as it is the ONLY suspension component principally designed to control body roll. Unfortunat...

Whiteline Sway Bar Links are adjustable for length via center alloy turnbuckle, suit 10mm ID through-bolt. Kits contains 2x complete link assemblies with dust boots but exclude mounting hardware.

Fits: EVO X

Part# KLC174

There is no better way to get your car to corner flatter, deeper and with more conviction than with WORKS Sway bars. Upgrading the front sway bar is a crucial step in getting the EVO X to corner flatter and have improved turn-in.

WORKS has developed the perfect sway bar to ...

There is no better way to get your EVO X to corner flatter, deeper and with more conviction than with WORKS Sway Bars. The WORKS adjustable rear sway bar boasts solid construction while the WORKS front bar is hollow to transfer weight distribution rearward for better balance.
<...