Agency Power wanted to take the suspension capabilities to the next level by developing this Rear Sway Bar kit for the 2008 and up Mitsubishi EVO X

Agency Power has been known for their incredible suspension components to make you the fastest on the race track.

Eliminate 3 lbs. from the front of your EVO 10 and allow for a solid front motor mount to maximize throttle and shift response. 

Lightweight Front Cross Me...

This five point lower arm bar braces the chassis to the front control arms of your Evo X for reduced body roll and improved steering response.

The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The aluminum bar possesses high rigidity due to the two different designs available. The Type 1 is pressed ribbed while the Type 2 is sectioned. Cusco has al...

Cusco’s sway bars are available for most applications on the front or rear of the vehicle. Reducing body roll during hard cornering is not the only feature that can be increased with these. Depending on the particular size and position of the sway bar, over-steer and under-steer can be modifi...

The Cusco Front Center Power Braces for the 2008-2009 Lancer Evo X is a mulit-point, 2-part, longitudinal brace that is designed to strengthen the front/middle portion of the chassis and provides a noticable improvement in aggressive cornering.

The Cusco Front Floor Power Brace for the 08-09 Evo X connects the left and right sides of the front section of the chasis using a multi-point lateral brace.

The Cusco Front Rear Side Power Braces connect two points on each side of the chassis under the rear doors. These longitudinal braces are the most foward in the chassis of Cusco's rear braces.

After the installation of the pillow ball bushing kit you will notice improved cornering accuracy and stability of straight forward progress.

After the installation of the pillow ball bushing kit you will notice improved cornering accuracy and stability of straight forward progress.

The Cusco Rear Member Power Brace for the Evo X is multi-point, 2-part brace kit that is replaces an OEM brace and helps to tie the rear suspension mounting points to the chassis.

This lateral Cusco 08-09 Evo X brace installs above the exhaust and provides multi-point stiffening, but does require trimming of the OEM heatsheild.

These left and right Cusco Evo X braces connect the rear suspension to the rear section of the chassis for improved stiffness.

The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The aluminum bar possesses high rigidity due to the two different designs available. The Type 1 is pressed ribbed while the Type 2 is sectioned. Cusco has al...

Cusco’s sway bars are available for most applications on the front or rear of the vehicle. Reducing body roll during hard cornering is not the only feature that can be increased with these. Depending on the particular size and position of the sway bar, over-steer and under-steer can be modifi...

Cusco Zero-1 Coilovers are for those looking for a high-quality coilover offering adjustable ride height without affecting spring preload. This will allow for proper corner-weighting for the ultimate handling experience. Furthermore, you do not have to give up any suspension stroke to change ...

Cusco Zero-1 Coilovers are for those looking for a high-quality coilover offering adjustable ride height without affecting spring preload. This will allow for proper corner-weighting for the ultimate handling experience. Furthermore, you do not have to give up any suspension stroke to change ...

The all new Zero-2E system. With all the same benefits and features as the Zero-2 coilover, the Zero-2E adds the option to electronically control the shock adjustment from inside the car. Utilizing the E-Con ,you can select what stage (of 5) you want the shock set at.

Instantly improve steering feel and handling with the installation of a front strut tower bar.

Instantly improve your EVO's handling capabilities!

Improve the appearance and handling of your Evolution X in one quick swoop.

Lowering Specs:

Front: 1.2"

Rear 1.0"

Fits: Mitsubishi Lancer Evolution X 2008-2009

GTSPEC Ladder Braces are designed to give you Mitsubishi Evolution X an edge over the competition and shave time off your laps.

Most OEM stock designs are made for the average consumer in mind, not the ones seeking the ultimate in performance and handling.

...

GTSPEC Type D Front Strut Brace For Mitsubishi EVO X

GTSPEC Type D EVO X Rear Strut Brace. Modification to the plastic cover needed.

The H&R Lowering Springs are a great choice for enthusiasts who are looking to lower the center of gravity in order to make their car handle better.

H&R continues its innovative design and manufacture of new suspension technologies with the introduction of their Street Performance Coil-Over Kits. Featuring black, hard-anodized aluminum front struts for strength and beauty, Street Performance Coil-Over Kits ultimately reduce u...

Designed and tuned for competition / track EVO X's.

The Hipermax III Sport series has firmer spring rates and valving to take advantage of the smoother, more consistent pavement of race tracks allowing quicker, more precise transient response and instant direction changes ne...

Enhance the cornering performance of your EVO X with a set of Hotchkis Sport Suspension sport sway bars.

Owners of Evo X’s demand maximum performance from their cars. Seeing the
need for stronger end links during hours of track testing, Hotchkis
Sport Suspension has designed a high quality, adjustable rear end link
specifically designed for the EVO X.

The new Variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up.

Megan Racing Performance Lowering Springs are constructed of SAE 9254 Cold
Wounded Steel, one of the strongest materials available.

These rear upper Camber-Arms are adjustable to fine tune your EVO X's handling in the rear.

When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only.

- Con...

Megan Racing Coil-Over Damper Kits offer 32 Levels of damping force adjustment, full-height adjustment, and are matched with front and rear Pillow Ball upper mounts for camber correction.

Springs are made of SAE-9254 Steel, and are tested over 500,000 ti...

This sporty accessory stiffens your vehicles front chassis to help achieve better handling and control when cornering.

Corner with confidence!

This brace stiffens your EVO X's rear chassis, while providing a slick visual within the trunk.

Fits: Mitsubishi Lancer Evolution X

The Password:JDM 5-Point FRONT Strut Bar for the 2008+ Mitsubishi Lancer Evolution X are designed to strengthen the chassis of the EVO by joining the two shock towers together along with a third chassis reinforcement on the firewall. Improve the road feel and handling characteristics of y...

The Password:JDM 5-Point FRONT Strut Bar for the 2008+ Mitsubishi Lancer Evolution X are designed to strengthen the chassis of the EVO by joining the two shock towers together along with a third chassis reinforcement on the firewall. Improve the road feel and handling characteristics of y...

The Password:JDM 5-Point FRONT Strut Bar for the 2008+ Mitsubishi Lancer Evolution X are designed to strengthen the chassis of the EVO by joining the two shock towers together along with a third chassis reinforcement on the firewall. Improve the road feel and handling characteristics of y...

The only way to make your car turn, stop or go is if the entire tire patch is hitting the surface at hand.

Improve turn-in and increase handling prowess!

What is the PSRS?
In the Subaru world, these kits are known as the ALK or Anti-Lift-Kit.The anti-lift part of the kit is a very small feature comp...

Progress anti-roll bars dramatically improve handling. How? They minimize the traction-robbing body "lean" that rolls part of the outside tires off the pavement.

Our engineering staff has decades of experience in the design and tuning of performance suspension systems, including CART/Indy Cars, IMSA, SCCA, NASA, and SCORE competitors.

Swift Sport Mach Springs are manufactured with a unique spring compound H5S.TW.

This super-strong material requires a double shot peening process to keep the spring's shape. The result is a high tensile strength spring requiring fewer coils than other brands, reducing overall weigh...

Tanabe DF210 lowering springs offer a large drop, while retaining the superb ride quality characteristics.

The tanabe 4 point front lower arm bar will help stiffen up the front end of your EVO X and noticeably improve cornering.

Tanabe SUSTEC GF210 lowering springs for the Evo X. These "Grip Feeling" line springs feature 4.3/3.5kg spring rate front/read for performance-oriented driving.

TEIN, with the biggest market share in Japanese car suspension in Japan, has
developed the S. Tech lowering spring through innovative technology.

The EVO X Whiteline Lateral Link-Adjust Camber kit kit allows greater
range, more precise adjustment, a more direct connection between body
and rear suspension delivering more predictable handling behavior.

There is no better way to get your car to corner flatter, deeper and with more conviction than with WORKS Sway bars. Upgrading the front sway bar is a crucial step in getting the EVO X to corner flatter and have improved turn-in.

WORKS has developed the perfect sway bar to ...

There is no better way to get your EVO X to corner flatter, deeper and with more conviction than with WORKS Sway Bars. The WORKS adjustable rear sway bar boasts solid construction while the WORKS front bar is hollow to transfer weight distribution rearward for better balance.
<...

WORKS Rear Upper Pillow Ball Mounts replace the rubber OEM units with a solid design that does not flex. This allows the multi-link rear suspension components to function as intended.

Anodized aluminum, these are a perfect compliment to the WORKS Adjustable Camber Plates ...

The WORKS Urethane Suspension Bushings will firm up all of the front and rear suspension points as well as the rear differential (all of which are originally mounted using traditional rubber that is more pliable).

These may not provide the same level of comfort as the stock...

The new WORKS/Öhlins Stage III Road & Track coilovers for the EVO X continue the advancement of the DFV (Dual Flow Valve) components. This kit is designed to enhance Mitsubishi's S-AWC during track and autocross events while still keeping daily street use in mind.

Ext...