To gain power from the 4B11 MIVEC, AEM designed a fully enclosed airbox to house a DRYFLOW performance filter & utilize the factory air duct to draw the coolest air possible. 

TECH TIP: Direct bolt on - Includes everything required for insta...

Unlike many competitors, aFe flow-bench tests and dyno tunes each intake system in-house with an emphasis on mid-range power, giving your 4B11T powered EVO X more usable power and torque response in daily and real-world driving situations.

Turbocharged vehicles require a couple of simple bolt on modifications to really open up their power and give that engine a great sound.

Improving upon turbo air flow is what the new Agency Power Suction Pipe Kit for the Mitsubishi EVO X is designed to do.

With this kit you can convert your standard AMS EVO X intake to the AMS cold-air version.

The AMS EVO X Performance Cold Air Intake offers the best performance gains available.

The AMS EVO X intake pipe is designed to improve air flow to the turbocharger and increase horsepower and performance.

Easily improve throttle by installing this high flow efficient intake system.

The AQ Motorsports Evo X Intake system offers significant improvements in horsepower, torque, and response. Developed on our TimeAttack Evo X, our intake has proven dyno and track tested results.

High flow compressor 3" inlet elbow for the EVO X turbo. Designed to be used on stock turbo (alum adapter plate shown) or without the adapter plate, it fits the Garrett GT3071R, GT3076R, or ATP GT35R. 3 bolt flanged. All aluminum, TIG welded construction and wrinkle black powdercoated.

High flow compressor 3" inlet pipe set for EVO X turbo. Includes 3" inlet elbow, 3" couplers, and upper pipe to mate to airbox. All aluminum, TIG welded construction and wrinkle black powdercoated.
Designed to be used on stock turbo (alum adapter plate shown) or without the adapter plate, ...

High flow compressor outlet pipe for Evo X turbo. 2 bolt flanged, progressive tapered and larger diameter. Lightweight aluminum. Contoured machined outlet flange for smooth flow and o-ring flange face eliminates leaks and the 2 bolt gasket for proper seal. Immediately tapers from stock 1.75" diam...

A complete Intake kit. Including the Carbon Air Duct, and the filter element. This system will allow you to utilize the factory Cold air setup that forces cool air from the front of the car into the intake system.

Fits: 08+ EVO X

Part# 27007

The BLITZ LM Intake System was design to reduce intake restriction and provide maximum filtration.

By utilizing a 4 layer cotton filter, blitz has created an air filter that reduces air resistance, increases filtering efficiency and is very durable.

Improve horsepower and gas mileage instantly!

This is the Buschur Racing Air Filter Kit for the 2008 Mitsubishi Lancer Evolution X.

Made of 304 mandrel bent S.S. this is a direct replacement of your factory air inlet. It will include couplings, clamps and a new recirculation hose for your BOV.

This is the newest offering for the Evo X intake system from Buschur Racing.

The BR Evo X mass air pipe kit is a COMPLETE air intake system for you Evolution X.

The BR Evo X mass air pipe kit is a COMPLETE air intake system for you Evolution X.

The kit will include everything pictured which is our BR Evo X Mass Air Pipe, Air filter kit & mounting bracket.

The kit will include everything pictured which is our BR Evo X Mass Air Pipe, Air filter kit & mounting bracket.

The COBB Tuning 3" FP Turbo Inlet Hose is designed for use with Forced Performance 3" turbo compressor inlets.

When installed on a stock EVO X, the Cobb Tuning SF Intake system adds an additional 21 HP and 24 lb-ft of torque to the wheels. Expect even larger gains when running higher than stock boost levels.

The true taper design of the COBB Inlet Hose increases the air flow volume that is delivered directly to your turbocharger, providing much more efficient power and response. 

The COBB Tuning high flow Turbo Inlet Hose utilizes a custom steel re...

Cosworth's High Flow Intake Systems feature increased diameter, large smooth radius bent aluminum inlet tubes for superior air flow management coupled with a high flow air filter for maximum air flow and performance.

Each kit includes an integrated heat shield designed to...

The ETS MAF Intake Includes a huge 5" inlet K+N air filter which feeds the intake pipe via the ETS EVO X MAF adapter which is milled on the ETS lathe for the perfect transition to the inlet diameter of the MAF sensor tube.

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include replacing the factory intake plenum wit...

The GReddy Airinx Intake with mesh covering is a replacement for your stock restrictive air filter. Higher flow rate gives you more power.

The GReddy EVO X suction intake pipe increases the air flow volume that is delivered directly to your turbocharger, providing much more efficient power and response.

If you are running a stock air filter do your car a favor and buy this hybrid drop in panel filter.

The hybrid is totally redesigned from the old school HKS drop in panel filter.

The HKS hybrid panel air filter has a redesigned filter that houses 2 different types o...

Features a high flow aluminum suction pipe that has been tested for optimal air flow.

Filter cage allows for 30% more intake surface area, Aluminum back plate for added strength, Sealing ring reduces contaminants from entering engine, Dual Density wet filter element.
...

The only intake system you need in your EVO 10! Features a cast multi-stage tuned mid section for volumized airflow throughout the entire power band.

Combined with the upper intercooler piping (included), the system eliminates hose expansion to increase throttle body response g...

K&N Universal Filter - Round Cone Filter: K&N's Universal Air Filters are designed and manufactured for a wide variety of applications. Regardless of the angle, offset diameter of the air ...

Why not bolt 21 Horsepower on to your EVO X in minutes?

The K&N typhoon Air Intake system includes turbo air intake pipe, high flow air filter, hose clamps, heat shield, and full upper intercooler pipe and all necessary hardware to install. 2 great mods 1 low price!
...

Password:JDM Dry Carbon Fiber PowerChamber Intake Box for the 2008+ Mitsubishi Lancer Evolution X has arrived! PasswordJDM rolled up their sleeves and went to work for days and months designing this thing, and now, its just about perfect. Made entirely of Dry Carbon, the PWJDM intake syst...

Password:JDM Dry Carbon Kevlar PowerChamber Intake Box for the 2008+ Mitsubishi Lancer Evolution X has arrived! PasswordJDM rolled up their sleeves and went to work for days and months designing this thing, and now, its just about perfect. Made entirely of Dry Carbon Kevlar, the PWJDM int...

Get rid of the stock EVO 10 intake and replace it with a fresh new upgraded carbon fiber intake.

Direct bolt on, replaces stock unit! No other modifications needed. Easy installation takes 40 minutes and can be done with common hand to...

The Takeda Retain Intake produced 12hp and 20 ft lbs of torque.

Takeda intakes are constructed out of lightweight clear-coat anodized tubing for maximum air flow and a great style.

The TurboXS High Performance Intake System for the Evolution X is the perfect starting block to build your Street & Race Monster around.

The Secret Weapon Intake was designed, to increase air intake volume to the engine. The concept is to create two different air velocity profiles, one traveling at higher speeds than the other.

This technology increases air volume and speed to the engine, which naturally ...

Better air flow means more power. Cleaner air means increased engine longevity. Now you can have the best of both worlds with the WORKS High-flow Drop-in Air Filter.

This direct drop-in replacement for the factory filter retains stock drivability and can flow more than tw...