To gain power from the 4B11 MIVEC, AEM designed a fully enclosed airbox to house a DRYFLOW performance filter & utilize the factory air duct to draw the coolest air possible. 

TECH TIP: Direct bolt on - Includes everything required for insta...

Unlike many competitors, aFe flow-bench tests and dyno tunes each intake system in-house with an emphasis on mid-range power, giving your 4B11T powered EVO X more usable power and torque response in daily and real-world driving situations.

Turbocharged vehicles require a couple of simple bolt on modifications to really open up their power and give that engine a great sound.

Improving upon turbo air flow is what the new Agency Power Suction Pipe Kit for the Mitsubishi EVO X is designed to do.

With this kit you can convert your standard AMS EVO X intake to our cold-air version.

This is the first step in modifying your EVO X.

The AMS EVO X intake pipe is designed to improve air flow to the tu...

The AMS EVO X Performance Cold Air Intake offers the best performance gains available.

Easily improve throttle by installing this high flow efficient intake system.

The BLITZ LM Intake System was design to reduce intake restriction and provide maximum filtration.

By utilizing a 4 layer cotton filter, blitz has created an air filter that reduces air resistance, increases filtering efficiency and is very durable.

Improve horsepower and gas mileage instantly!

This is the Buschur Racing Air Filter Kit for the 2008 Mitsubishi Lancer Evolution X.

This item is NEEDED with an open element air filter on the Evo X. The BR Evo X carbon fiber shield is some of the highest quality work and carbon fiber you will find.

Made of 304 mandrel bent S.S. this is a direct replacement of your factory air inlet. It will include couplings, clamps and a new recirculation hose for your BOV.

This is the newest offering for the Evo X intake system from Buschur Racing.

The BR Evo X mass air pipe kit is a COMPLETE air intake system for you Evolution X.

The BR Evo X mass air pipe kit is a COMPLETE air intake system for you Evolution X.

The kit will include everything pictured which is our BR Evo X Mass Air Pipe, Air filter kit & mounting bracket.

The kit will include everything pictured which is our BR Evo X Mass Air Pipe, Air filter kit & mounting bracket.

The COBB Tuning 3" FP Turbo Inlet Hose is designed for use with Forced Performance 3" turbo compressor inlets.

When installed on a stock EVO X, the Cobb Tuning SF Intake system adds an additional 21 HP and 24 lb-ft of torque to the wheels. Expect even larger gains when running higher than stock boost levels.

The ETS MAF Intake Includes a huge 5" inlet K+N air filter which feeds the intake pipe via the ETS EVO X MAF adapter which is milled on the ETS lathe for the perfect transition to the inlet diameter of the MAF sensor tube.

The GReddy Airinx Intake with mesh covering is a replacement for your stock restrictive air filter. Higher flow rate gives you more power.

The GReddy EVO X suction intake pipe increases the air flow volume that is delivered directly to your turbocharger, providing much more efficient power and response.

The Harman Motive Evo X Intake system offers significant improvements in horsepower, torque, and response. Developed on our TimeAttack Evo X, our intake has proven dyno and track tested results.

If you are running a stock air filter do your car a favor and buy this hybrid drop in panel filter.

The hybrid is totally redesigned from the old school HKS drop in panel filter.

The HKS hybrid panel air filter has a redesigned filter that houses 2 different types o...

Features a high flow aluminum suction pipe that has been tested for optimal air flow.

Filter cage allows for 30% more intake surface area, Aluminum back plate for added strength, Sealing ring reduces contaminants from entering engine, Dual Density wet filter element.
...

The only intake system you need in your EVO 10! Features a cast multi-stage tuned mid section for volumized airflow throughout the entire power band.

Combined with the upper intercooler piping (included), the system eliminates hose expansion to increase throttle body response g...

Why not bolt 21 Horsepower on to your EVO X in minutes?

The K&N typhoon Air Intake system includes turbo air intake pipe, high flow air filter, hose clamps, heat shield, and full upper intercooler pipe and all necessary hardware to install. 2 great mods 1 low price!
...

Get rid of the stock EVO 10 intake and replace it with a fresh new upgraded carbon fiber intake.

Direct bolt on, replaces stock unit! No other modifications needed. Easy installation takes 40 minutes and can be done with common hand to...

The Takeda Retain Intake produced 12hp and 20 ft lbs of torque.

Takeda intakes are constructed out of lightweight clear-coat anodized tubing for maximum air flow and a great style.

The TurboXS High Performance Intake System for the Evolution X is the perfect starting block to build your Street & Race Monster around.