Space out your after cat oxygen sensor with this piece to disable the check engine light that comes on after a aftermarket exhaust is installed.

Full 3″ stainless steel with thick flanges and includes the o2 sensor location. This test pipe will help spool your turbo faster increasing boost and horsepower. A must have to maximize exhaust flow that is needed on a turbo charged car.

Megan Racing Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish.

The Evolution X Race pipe is the key to big horsepower gains. Removing the 2nd catalytic converters on the vehicle will give you an additional 10whp gain when used our EVOX-FP & EVOX-CBE and no other mods.

Make more power and let your turbo breathe!

- 304 Stainless steel piping
- 304 Stainless steel casted elbows
- TIG welded to perfection
- 3.0 lbs (starting) compared to 4.5 lbs OEM

Fits:...

Make more power and let your turbo breathe!

- 304 Stainless steel piping - 304 Stainless steel casted elbows - TIG welded to perfection - 3.5 lbs (starting) compared to 14.0 lbs OEM - Same CEL fix used on the UR Evo X and IX Test Pipes - Direct Bolt-on

Racepipe v2.0, cat delete for EVO X (EVO 10). Features stainless tubing, TIG welded construction. Dual O2 bungs (one extra for wideband tuning) and CNC machined flanges. 100% bolt-up replacement for restrictive stock cat.

Improve turbo spool and increase throttle response instantly with this EVO downpipe!

TECH TIP: Includes everything for an easy installation such as gaskets, hardware, etc.

Fits: Mitsubi...

Features a widened width of 3" for improved flow of exhaust gases from the turbocharger.

The down pipe is constructed of T304 stainless steel, mandrel bent tubing, which it capable of fitting to the OEM exhaust or the Megan Racing EV...

Instantly reduce turbo lag and increase the power of your EVO 10 throughout the entire power band. Built out of T-304 stainless steel for a long life span.

Direct bolt on! Includes all hardware for an easy ins...

The Evolution X Front Pipe was designed to remove the 1st catalytic converter. This will free up the majority of your horsepower gains.

CNT Racing downpipe for the EVO X

Made with T-304 stainless steel

This is full stainless steel, even the flange is stainless

Comes with the resonator

Part# CNT-DP-08EVO

3" Race pipe, cat delete pipe for EVO X (EVO 10). 304 grade Stainless tubing, TIG welded construction. Dual O2 bungs and CNC machined flanges. 100% bolt-up replacement for restrictive stock cat assembly. Good for 30 ft/lb ...

The EvoX is an incredibly potent machine, but it is unfortunate that
this new redesign did not get a big bump in power output.

The Evolution X High Flow Cat-pipe allows you to bolt on horsepower while staying 50 states legal with a Catalytic Converter on the car.

The cp-e™ QuickPower™ Pipe represents one of the quickest and easiest
power upgrades available for the EvoX.

The COBB Tuning Mitsubishi EVO X Downpipe features a widened diameter of 3" for increased flow of exhaust gases from the turbo charger to allow for improved horsepower and torque.

Make more power and let your turbo breathe!

- 304 Stainless steel piping
- 304 Stainless steel casted elbows
- TIG welded to perfection
- 3.5 lbs (starting) compared to 14.0 lbs OEM
- Same CEL fix used on the UR Evo X and IX Test Pipes
- Direc...

3" stainless mid-pipe for 2008 and up Mitsubishi Evolution x (10), mandrel bent and V-Band flanged, connects directly to back of cat on EVO X and terminates with 3½ V-Band flange which allows you to add one muffler with either si...

15 Wheel horsepower gains from JUST A TEST PIPE!

This pipe replaces the restrictive stock cat converter. The pipe that is in between the catback exhaust and downpipe.

Make more power and let your turbo breathe!

- 304 Stainless steel piping
- 304 Stainless steel casted elbows
- TIG welded to perfection
- Ceramic high-flow catalytic converter (efficient to 450 hp)
- Bolt-on

Fi...

Agency Power has released their Cat Delete Racing Pipe for the Mitsubishi EVO X.

With the Mitsubishi EVO evolving here in the USA since 2003, a lot of parts have come out to make the car perform and handle to its full potential.

Already have a buschur racing catback exhaust? Well...The Buschur Racing
Evo X downpipe is the next piece in order to give your EVO X the best
performance.

Improve exhaust gas flow and increase horsepower by replacing the restrictive stock down pipe.

65mm Diameter piping for maximum flow. Constructed of SUS304.

TECH TIP:  Direct bolt on part. Includes all hardware, an...

Invidia Mitsubishi 09-up EVO X One Piece Down-Pipe & Test-Pipe

Item No.: HS09MEXDPN

Piping Dia.: 76m...

Make more power and let your turbo breathe!

- 304 Stainless steel piping
- 304 Stainless steel casted elbows
- TIG welded to perfection
- 3.5 lbs (starting) compared to 14.0 lbs OEM
- Same CEL fix used on the UR Evo X and IX Test Pipes
- Direc...

J-Pipe O2 Bung (Prevents Check Engine Lights)

Full 3" stainless steel with thick flanges. This downpipe will help spool your turbo faster increasing boost and horsepower. A must have to maximize exhaust flow that is needed on a turbo charged car.

Make more power and let your turbo breathe!

CNT Racing racing full length Catted downpipe for the EVO X

Made with T-304 Stainless Steel

This is full stainless steel, even the flange is stainless

Comes with a 200 cell high flow cat.

Part# CNT-DP-EVOX-CT

- Full Stainless Steel Construction
- 70mm diameter improves exhaust gas flow
- Includes all hardware and heat wrap for an easy install
- Direct bolt on!

Fits: Mitsubishi Lancer Evolution X 2008+  (CZ4A eng...

Divorced 3" stainless O2 housing, downpipe and cat delete assembly for 2008 and up Mitsubishi Evolution X (10 high flow replacement for stock restrictive cast elbow, stock downpipe, and stock cat. Bolt up a 3" stainless catback system and you have a full 3" turboback.

This downpipe is for EVO 10 owners who want to achieve the most possible horsepower possible! EvoXparts.com rates this the best downpipe on the market currently for the Lancer Evolution X 2008 +

Price includes a downpipe and O2 housing (turbo outlet)

- 304 Stainless steel piping...

High Performance and Ultra light weight straight pipe.
Straight pipe diameter is 80mm with wall thickness of 1mm. The pipe weighs mere 2.5 lbs.

Straight Pipe Contents:
Straight Pipe, Gasket, Flange Bolt, Tie Wrap, Bolt Smooth Paste & Sticker
...

Tomioka Racing EVO X Downpipe allows high flow compares to the stock unit which has smaller piping and restrictive elbow.

The AMS 3" Stainless Steel Resonated Test Pipe provides an excellent alternative to running a catalytic converter on the street or at the track.

Like all other AMS exhaust products this resonated test pipe is Tig welded with 100% 304 stainless components including th...

The AMS 3" High-Flow Cat provides an excellent way to increase horsepower all while keeping you legal.  Utilizing a steel core catalytic converter instead of the conventional ceramic core this piece is designed to stand up to extreme conditions and last!

Like all...

Improve exhaust gas flow and increase horsepower by replacing the restrictive stock pipe.

65mm Diameter piping for maximum flow. Constructed of SUS304.

TECH TIP: Fits either the stock muffler or 31021-AM00

The divorced and transformable 3" stainless O2 housing and downpipe assembly for 2008 and up Mitsubishi Evolution X (10) is a much higher flowing replacement for stock restrictive cast iron exhaust elbow and small diameter downpipe just before the cat.

This unit bolts ri...

The TurboXS Evo X Bellmouth is designed to be the "be-all and end-all" of EVO X Front Pipes.

Easily improve throttle response and horsepower with the Tanabe high flow downpipe.

The AMS EVO X "Widemouth" downpipe is the most power producing downpipe on the market for the EVO 10.

Using a CAD designed cast o2 housing AMS was able to obtain every angle for perfect fitment and flow.
 
The AMS downpipe is completely made of 304 stainles...

Mitsubishi 09-up EVO X High Flow Cat. One Piece Down-Pipe & Test-Pipe

Item No.: HS09MEXDPC

Piping Dia.: 76mm

Mitsubishi Evolution X  Titanium Tip Racing Cat-Back

Item No.: HS09MEXGRT

Piping Dia.: 76mm

...

Split Wastegate and Exhaust Design.

Split Wastegate and Exhaust Design

Downpipe Features:

• One piece design replaces factory downpipe and catpipe
• High-flow 200 cell metal substrate catalytic converter
• Full 304 SS construction
• 3" mandrel bent tubing...

CNT Racing 08-10 Mitsubishi EVO X Version with Stainless tip.

Made with T-304 Stainless steel, 3 inch piping split to dual 2.5 inch piping with 115MM tip.

Part# 20-9391V2

For those EVO Enthusiasts where exhaust quietness is a strong consideration, the StealthWORKS muffler is your answer. The original design is fairly complex (see image below) with room to improve airflow without sacrificing sound suppression.

We take the stock EVO muffler an...

Instantly improve horsepower, torque, and throttle response with the installation of this 3 inch EVO X cat back exhaust.

Produces an incredible sound that sounds like a rocket ship taking off from the pad.

Full 76 mm piping with 4.5 inch tips