The WORKS Throw short shifter provides reduced travel when switching between gears. It incorporates a revised design to the OEM shape and leverage angles so your hand is located in a more natural position for the left hand drive Evolution.

Includes hardware, installation ...

The WORKS SS Brake Line Kit is not only the absolute best on the market, but is also designed to meet the Department of Transportation Motor Vehicle Standard MVSS-1006. Our performance lines increase safety and brake responsiveness due to no appreciable volumetric expansion in the brake lin...

A lightweight flywheel reduces rotating mass for quicker throttle response for a livelier and faster revving engine. The WORKS Spin, weighing a scant 4.2Kg, will make rev-matching on downshifts that much easier and allow the turbo to stay in boost more effectively.

While ...

The WORKS polyurethane Shifter Console Bushings significantly increase the stiffness between the plastic shifter cage and the steel chassis for a more direct shifting feel. NOTE: These are not solid metal bushings which provide no "give" and can fatigue the plastic cage as it takes all o...

The WORKS Hybrid (polyurethane/steel) Shifter Cable Bushings provide increased ease and precision during shifting without the increased wear on internal transmission components. With the run-of-the-mill bushings, you either have urethane pieces that can’t be accurately machined and in const...

Producing power is one thing... getting it to the ground is another. The WORKS line of clutch upgrades for the EVO is available to help ensure that the extra output offered by our Power Packages is finding its way to the tarmac, gravel or snow.

Producing power is one thing... getting it to the ground is another. The WORKS line of clutch upgrades for the EVO is available to help ensure that the extra output offered by our Power Packages is finding its way to the tarmac, gravel or snow.

Producing power is one thing... getting it to the ground is another. The WORKS line of clutch upgrades for the EVO is available to help ensure that the extra output offered by our Power Packages is finding its way to the tarmac, gravel or snow.

Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with billet aluminum pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T's. The mounts keep the propeller shaft from moving under hard acceleration, stopping and turn...

Tomioka Racing final drive gear set raises the overall gearing of EVO.

Attention Mitsubishi Lancer owners! Quaife Engineering has responded to demands of motorsport competitors who requested a more durable high performance differential to provide an alternative to the stock Mitsubishi unit, by launching a front automatic torque biasing (ATB) helical gear lim...

Bang through gears in style with this Mitsubishi shift knob!

Bang through gears in style with this Mitsubishi shift knob!

If you choose Five Point Four you're either building an all out race car or a rocket. This disc will show you what grip really feels like.

Like Fidanza's lightweight flywheels we choose to use the very best in materials. That's why we designed our Three Point Two with the Kevlar buttons.

Combine carbon and Kevlar, give them a steel backing and you have the most durable and longest lasting street clutch available.

Fidanza flywheels are made from 6061 T6 aluminum, they are designed to be as light as possible, but at the same time remaining durable.

The friction surface is made of a very special 1050 high carbon alloy steel which allows the use of about any clutch material.  

Aluminum f...

For high-powered applications EXEDY offers Multi plate clutches. These are designed for hot street action as well as drag, road, and rally racing.

For high-powered applications EXEDY offers Multi plate clutches. These are designed for hot street action as well as drag, road, and rally racing.

For high-powered applications EXEDY offers Multi plate clutches. These are designed for hot street action as well as drag, road, and rally racing. All of our multi plate clutches come with a lightweight chromoly steel flywheel, and the famous purple anodized forged aluminum clutch cover. De...

Great replacement for a stock clutch! For Lancer Evolution X's with no mods or very mild bolt on's.

Wheel Torque Capacity:  322

Fits:  Mitsubishi Evolution X

Part # 05803A

For high-powered applications EXEDY offers Multi plate clutches. These are designed for hot street action as well as drag, road, and rally racing.

Higher Clamp loads for more power capacity!

Wheel Torque:  460
Clamp Load:  3700lb

Fits: Mitsubishi Evolution X

Higher Clamp loads for more power capacity!

Wheel Torque:  402
Clamp Load:  3700lb

Fits:  Mitsubishi Evolution X

For high-powered applications EXEDY offers Multi plate clutches. These are designed for hot street action as well as drag, road, and rally racing.

The Cusco Low Initial TYPE RS

• Low power loss means better lap times for even the mild tuned of cars
• Chattering is kept low
• Improved durability as clutch plates are low pressured
• The LSD efficiency is higher with smoother oil flow between p...

This assembly, available with a rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides 300% increase in torque capacity. 300 mile break-in recommended with this set-up.

...

This assembly, available with a double spring, six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides 300% increase in torque capacity. 300 mile break-in recommended with this set-...

This assembly, available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides 250% increase in torque capacity. 300 mile break-in recommended with this set-u...

This assembly, available with a double spring, six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides 250% increase in torque capacity. 300 mile break-in recommended with this set-...

This segmented Kevlar material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for 150% increase in torque capacity. Provides quick but smooth engagement and extended life. 500 mile break-in RE...

This assembly provides an estimated 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Carbon Kevlar material with its alloy backing matched to a performance pressure plate will provide smooth engagement a...

The COBB Knob is a fusion of the highest quality materials that, when properly mated, produce a knob that feels as good as it looks.

This will make a dramatic difference in the way your EVO X shifts.

- CNC precision machined for perfect fitment
- High quality Aluminum
- Includes everythi...

Overheating is a common occurrence when driven hard.

The AMS Trans. cooler helps to prevent that by using a high quality larger capacity heat exchanger with a fan that pulls air through the core the entire time the car is running.

This helps to keep transmission te...

Bang through gears with authority!

AMS Shifter Base Bushings will greatly improve shift quality and accuracy and are easy to install. Replaces the stock sloppy rubber base bushings.

Fits: Mitsubishi Lancer Evolutio...

The AMS Evo X clutch line eliminates expansion giving you total control of your clutch.

As the clutch pedal is depressed, the stock nylon hose expands making your clutch pedal feel less direct and at worst can make it difficult to shift.

The AMS Evo X clu...

The AMS EVO X 5 Speed Gate Selector Bushing Kit is made to eliminate shifter play and give a tighter feel providing precise gear changes.

Preferred for Street and Drag Racing

The ACT Street EVO X kit will hold up to 420LBS Torque. This is a full clutch kit, Includes street clutch disc, heavy duty pressure plate, alignment tool, and throw out bearing.

The pedal feel is similar to stock. It is a little bit stiffer then stock, but nothing that is going to bre...

The EVO X ACT Race Clutch Kit (6 puck) will hold up to 537LBS Torque. This is a full clutch kit, Includes clutch disc, heavy duty pressure plate, alignment tool, and throw out bearing.

The EVO X ACT Race Clutch Kit (6 puck sprung hub) will hold up to 537LBS Torque. This is a full clutch kit, Includes clutch disc, heavy duty pressure plate, alignment tool, and throw out bearing.

The EVO X ACT Race Clutch Kit (4 puck sprung hub) will hold up to 655LBS Torque. This is a full clutch kit, Includes clutch disc, heavy duty pressure plate, alignment tool, and throw out bearing.

Super lightweight! Weighing in at a measly 9.5lbs.