Add a splash of carbon fiber to the inside of your whip!

TECH TIP: Designed to adhere with 3m Tape, this product just takes minutes to install. Made in the USA

Fits: Mitsubishi Lancer Evolution X 2008-2009

Part #: CBD-EVOX-HVAC

$119.95

Megan Racing Coil-Over Damper Kits offer 32 Levels of damping force adjustment, full-height adjustment, and are matched with front and rear Pillow Ball upper mounts for camber correction.

Springs are made of SAE-9254 Steel, and are tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating spring durability was highly improved. You will own full control of your vehicle regardless if you are driving on a normal street, up to a mountain region, country road or formal racetrack.

EVO 10 Coilover Features:

- Spring Rates: 8kg Front and 6kg Rear

- 32 Levels of Adjustable Damper

- Pillow Ball Upper Mounts. (front only)

- Rubber Dust Covers.

- Adjustable Ride Height

- Aggressive Spring Rates

- Single-Cyliner Design

- Aluminum Brackets

 

32 Levels of Adjustment:

1-8: Suggested for track use.

9-16: Suggested for mountain/aggressive use.

17-32: Suggested for common street use.

 

All coilover damper kits come with 1 year manufacture-defect warranty.

 

Fits: Mitsubishi Lancer Evolution X  2008-2009

Part #: MR-CDK-MLE08

$937.95

AMS stainless steel brake lines improve pedal feel, reduce the amount of time between applied pedal pressure and actual deceleration by reducing the expansion that is allowed by stock rubber lines.

This provides a quicker pedal response and consistent brake pressure.

TECH TIP: These are a direct replacement for OEM lines. This kit includes both front and rear brake lines.

Fits: Mitsubishi Lancer Evolution X 2008-2009

Part #: AMS-EVOX-BL

$177.95

HKS M-Series spark plugs are high performance Iridium plugs designed to provide improved ignition performance, durability and anti-carbon build-up.

Features:
- 0.6mm Iridium Alloy Center Electrode
- Outer Electrode with Platinum Chip
- Short Type Outer Electrode (Anti-Vibration)
- Thermal Edge
- Spark Support Gap

TECH TIP: M Series is recommended for reliable ignition, durability and anti-carbon buildup under high load.

Fits: Mitsubishi Lancer Evolution X 2008-2009

Part #: 50003-M45XL

$89.95

HKS M-Series spark plugs are high performance Iridium plugs designed to provide improved ignition performance, durability and anti-carbon build-up.

Features:
- 0.6mm Iridium Alloy Center Electrode
- Outer Electrode with Platinum Chip
- Short Type Outer Electrode (Anti-Vibration)
- Thermal Edge
- Spark Support Gap

TECH TIP: M Series is recommended for reliable ignition, durability and anti-carbon buildup under high load.

Fits: Mitsubishi Lancer Evolution X 2008-2009

Part #: 50003-M40XL

$89.95

HKS D1 Limited Edition Oil Cap looks great bolted on the EVO 10 motor.

Easy installation, only takes minutes.

Fits: Mitsubishi Lancer Evolution X 2008-2009

Part #: 24003-AM002

$57.95

The only intake system you need in your EVO 10! Features a cast multi-stage tuned mid section for volumized airflow throughout the entire power band.

Combined with the upper intercooler piping (included), the system eliminates hose expansion to increase throttle body response going into boost. Dyno proven performance, not hype!

This system will work with the factory Front mount on the Evo or with almost any of the aftermarket units. The BOV flange on the upper IC pipe will fit the stock blow off valve or any aftermarket BOV that fits with the stock flange.

Features
- Upper Intercooler Piping
- Blow off Valve recirculation
- Multi-Stage Tuned intake
- Completely bolt- on application

Fits: Mitsubishi Lancer Evolution X 2008-2009

Part #: SP1899P

$547.95

Enhance the look of your Lancer in minutes with this carbon fiber spoiler! 

TECH TIP: Made from Aerospace Carbon Fiber.  Mounts using 3m Double Sided Tape.

Fits: Mitsubishi Lancer Evolution X 2008-2009  / Lancer GTS 2008-2009

Part # CBD-EVOX-PVO

Ships via TRUCK FREIGHT! No Express shipping available.

Part #: CBD-EVOX-PVO

$229.95

The HKS Super Sequential Blowoff Valve (SSQV) is a dual stage pull type relief valve. Unlike other blow off valves that are push type, the SSQV will not leak under high boost conditions nor under vacuum at idle.

Being of a pull type valve structure, the SSQV can not physically leak under any level of boost because boost pressure also keeps the valve closed against its seat. The SSQV is actuated by pressure alterations only, not by the rate of pressure or vacuum in the line, which ensures a quick valve response and complete closure during idle.

On typical blow-off valve designs, a large valve is utilized in order to accommodate high boost / high horsepower applications. However, these large valves tend to react slowly and require high activation pressure to open, therefore are not able to activate and prevent compressor surge at light-load conditions.

The SSQV is constructed of polished billet aluminum, which ensures long-term durability and visual appeal. The mounting base utilizes a circular mounting flange that provides exception flow and complete secure mounting via a C-clip snap ring and O-ring gasket.

Includes 3 Inlet and 1 Outlet Polished Aluminum Pipes

TECH TIP: Direct bolt on - includes everything needed for an easy installation.

Fits: Mitsubishi Lancer Evolution X 2008-2009

Part #: SKU343

$429.95

If you have the JDM smoked headlights, tinted windows, or dark rims you will want to do your EVO a favor and install these smoked corner markers to get rid of the stock altezza style corner markers.

TECH TIP: These come with everything you need to just plug in- bulb, harness, gasket. These are brand new OEM markers custom painted by STM. They still light up bright enough to be noticed. Price is for a full set of (2)

Fits: Mitsubishi Lancer Evolution X 2008-2009

Part # STM-1010

Part #: STM-1010

$79.95